HDDisk ETSAS8™ - NEW 6GB SAS - PCIe 2.0 External Tower SAS/SATA Expansion Solution!
The ETSAS8 SAS-to-SAS JBOD enclosures provides a compact external storage chassis capable of accommodating up to 8 x 6Gb/s, Serial-Attached SCSI (SAS) drives or 8 x 6Gb/s Serial ATA (SATA) drives, Great video solution, HD Video applications will work with out problems with a transfer rate up to 500 MB/Sec. BUILT IN SAS EXPANDER!
The New ETSAS8™ SAS-to-SAS JBOD solution provides a
compact external storage chassis capable of accommodating up to 8 x
6Gb/s, Serial-Attached SCSI (SAS) drives or 8 x 6Gb/s Serial ATA (SATA)
drives. The HDDisk SAS expander module is based on the LSI 28-port
LSISAS2x28 expander IC, SAS-2 chip which features 28 x 6Gb/s ports and
6G/3G multiplexing, SAS 2.0 zoning, self-configuration, table-to-table
routing, and an integrated PPC processor for SES-2 and enclosure
Each ETSAS8™ compact tower JBOD connects to the
host system through two 4-lanes SAS connectors (Host In) and two 4-lanes
SAS connectors (Exp. Out) to the next SAS-to-SAS JBOD enclosure.
SAS 2.0 is designed for much higher speed data
transfer than previous available and backward compatibility with SAS
1.0. The 6Gb/s SAS interface supports both 6Gb/s and 3Gb/s SAS/SATA disk
drives for data-intensive applications and 6Gb/s or 3Gb/s SATA drives
for low-cost bulk storage of reference data - Support
RAID level 0, 1, 10(1E), 3, 5, 6, 30, 50, 60 via a HBA RAID Card
Drives: SAS Hard Drives. • Up to 8 x 1" x 3.5" SAS Hot-Plug Hard Drives (6.0 Gb/s) at speeds of 10K or 15K RPM.
SATA Hard Drives. • Up to 8 x 1" x 3.5" SATA Hot-Plug Hard Drives (6.0 Gb/s at speeds of 7.2K or 10K RPM
JBOD Controller Modules SAS Connectors: • Expander board - 1 module • Sensors - 1 sensor on the expander board
Backplane Board Connectors: • 8 SAS Hard Drive Connectors • 1 Power supply connector • 2 Cooling fan module connectors • 1 Sets of Expander board connector.
Sensors: • 8 Temperature sensors (one for each slot)
LED Indicators - Hard Drive Carrier. • 1 Blue single-color activity LED • 1 Two-color LED status indicator per drive
Controller Back-Panel Connectors SAS connectors (per expander board) • 2 SAS "Host In" connector for connection to the host.
• 2 SAS "Expansion Out" connector for expansion to an additional JBOD enclosure
Expander board • 2 One-color LED status indicators for each SAS host port, one for SAS host port link and one for the activity status.
• 2 One-color LED status indicators for each SAS expansion port, one for SAS expansion port link and one for the activity state.
Serial connector: • One 6-pin UART RJ-11 connector (for factory use only).
Power Supply: • Wattage 220 W maximum continuous. • Voltage 90–256 V rated • Frequency 50–60 Hz • Amperage +12V/26A, +5V/19A, +3.3V/14A
Cooling Fan: • Speed:
2 X 2700rpm/brushless fan • Amperage:
Physical Dimension: • Height:
302 mm • Width:
146 mm • Depth:
290 mm • Weight:
14.9lbs/6.8 kg (without disk)
Environmental Temperature: • Operating:
10° to 40°C • Storage:
–40° to 70°C
Relative humidity: • Operating:
10% to 80% (non-condensing) • Storage:
5% to 95% (non-condensing)
Part Number: 1590 Model:HDD-ETSAS8-8TB Description: External Tower 8Bay 8TB 6Gb SAS RAID 5 Unit. Include 8 x 1TB 7200RPM SATA Drives
Part Number: 1592 Model:HDD-ETSAS8-16TB Description: External Tower 8Bay 16TB 6Gb SAS RAID 5 Unit. Include 8 x 2TB 7200RPM SATA Drives
Part Number: 1815 Model:HDD-ETSAS8-24TB Description: External Tower 8Bay 24TB 6Gb SAS RAID 5 Unit. Include 8 x 3TB 7200RPM SATA Drives
Part Number: 2696 Model:HDD-ETSAS8-32TB Description: External Tower 8Bay 32TB 6Gb SAS RAID 5 Unit. Include 8 x 4TB 7200RPM SATA Drives
Buy from any of our resellers or call us direct for any question.
Content 2008 - 2016 - Market Technology | RAIDDISKSTORE and HDDisk is a Trade Mark of Market Technology LLC. All rights reserved.