The ExaSAN B08S3-PS, specially configured with 8 SSD drives, delivers over 1600MB/s speeds.
This is 2 times Thunderbolt speeds. If the requirement is to copy, migrate, or transfer files in a short amount of time, B08S3-PS is the storage asset you may not miss. In 12 minutes, 1TB of imformation can be copied.
“Versatile” to “Small”
Versatile enough to be transportable, fit on the desktop, or added onto a SAN with the Compact switch, but the B08S3-PS™ is large in performance just like its big brothers . The B08S3-PS™ supports up to eight 2.5” SAS/SATA HDD or SSD drives. Total weight is no more than 5.5kg including drives.
Unlike other small form factor storage, the B08S3-PS takes full advantage of using PCIexpress protocol throughout the storage path. The 32Gb bandwidth is 32Gb throughout. There is no PCIe to FC conversion eliminating any protocol conversion delays. That is why it can reach 1400/1300 MB/s for read/write, respectively.
The new B08S3-PS SSD bundle from ExaSAN
A small, compact in size, RAID storage system, versatile enough for transportability, easily fits on the desktop or in any DIT cart.
The B08S3-PS requires a footprint of less than 1 square foot. Bundled with Intel SSD drives, it delivers amazing performance.
Focus on Content Creation, Not on Storage Speed Limitations
The B08S3-PS™ was developed with the changing workflow in mind where much editing work is done closer and closer to where powerful cameras capture content. On-set and on-location are words heard often as producers and directors realize cost and time savings, for example, from creating dailies on-location. Powerful and demanding applications require high performance storage, such as the B08S3-PS™, to complete the dailies and make decisions before shooting starts the next day. The B08S3-PS™ has about 4 times the storage performance of a 6Gb eSATA and 2 times the performance of Thunderbolt storage. It works well with demanding editing applications from companies such as Autodesk, Blackmagic, Assimilate, and IRDAS.
B08S3-PS for 3D Workflow
Creating 3D video at a minimum doubles the data rate requirement that the storage system must provide. For example, 2K DPX files for film requires about 300MB/sec performance from storage. For stereo or 3D, the storage system must be capable of providing at least twice the speed at 600MB/sec. The B08S3-PS™ can provide 1200MB/sec to meet these requirements.
The B08S3-PS™ includes performance equalization mode (EQ). This reduces the fluctuation between data transfer speeds over time so that the likelihood of potential frame drops are minimized which is a great thing. Another feature called disk lag proof (DLP) computes the RAID algorithm of weakening/failing drives (for example drives requiring multiple retries) so the actual data transfer completes even before the weak drive has successfully completed retries.
Easy To Deploy
B08S3-PS™ is the best cost effective high performance small form factor DAS solution. The package contains an 8 bay RAID system (drives not included), QSFP PCIe2.0 HBA card and cable. By connecting the B08S3-PS™ to the SW08-Q4™ PCIe SAN switch, which can connect to up to 8 clients, the contents of the B08S3-PS™ can be shared among the clients. Additional RAID systems can be added to the switch to increase storage capacity.
B08S3-PS Bundle for 4K DPX Workflow
2K DPX files for film requires about 300MB/s where 4K DPX may require up to 1300MB/s performance from storage. The B08S3-PS bundle can provide 1400MB/s read and 1300MB/s write to play multiple 2K as well as 16 Bit 4K DPX.
A Must Have for Working with the Next Level of Uncompressed Content
The B08S3-PS is a must have RAID system for the HD, 2K, and 4K editing process, It not only can store large 2K and 4K files easily, its high speed and equalization features allow it to move files without frame drops. The compact B08S3-PS is a BIG performer.
One workstation attached to one B08S2-PS
32Gb bandwidth, up to approximately 1200 MB/s
Max. capacity 8 TB ( with 1TB 2.5" SSD )
High performance/ cost ratio for 4K workflow
64Gb Solution for 4K Workflows
Each B08S3-PS package contains a 32Gb QSFP HBA and a 2M QSFP cable, everything you need for a DAS connection to a workstation or a SAN connection to a switch. A dual port QSFP HBA is available as an option, each port connected to a B08S3-PS, to provide 2800MB/sec speeds with OS striping to the workstation. The dual port QSFP HBA can also be used in the client workstation with one QSFP port connected to ExaSAN and the other QSFP port connected to a B08S3-PS for fast copying of an ExaSAN shared storage volume to a B08S3-PS for transportability.
One workstation attached to two B08S3-PS units through one QSFP dual port HBA.
64Gb bandwidth, up to approximately 2800MB/s speed with 16 drives.
Max. capacity 14 TB in RAID 5
Scalable capacity by OS striping two B08S3-PS
Volume backup by OS mirroring two B08S3-PS
Connect SAN and DAS With One Z2M Hybrid function HBA card
Now you can connect both SAN network and local DAS storage with one card. With one connector of this dual port Z2M HBA card connected to a B08S3-PS or any of ExaSAN PCIe3.0 storage device, and other to SWF16 V2 or any of ExaSAN PCIe2.0 switch. You can immediately download footage form shared storage to local DAS then upload back after editing in exceptional speed.
The above figure shows a workstation in an ExaSAN SAN network both connect to SAN and DAS.
One workstation attached to one B08S3-PS units through one QSFP Z2M port and to SWF16 V2 to share the SAN workflow via another port.
64Gb bandwidth, support full speed of both SAN and DAS
Supports Windows, Mac, and Linux OS workstations
Performance figures are based on simulated and calculated best case scenario; please consult with our Accusys people or your system integrator to create the best possible DAS or SAN solution fit for your specific requirement.
PCI Express Gen3. 8Gb x4, transfer rate up to 32Gb
1.9TB (8x 240GB SSD by imbedded setting), Maximum capacity depends on actual installation
Read 1400 MB/s, Write 1300 MB/s
Drives Type Supported
Support 8 x SAS/SATA 6Gb and SSD disks
Support 2.5’’ hard disks
Support 1TB hard disks
Hardware XOR/Multi-Parity engine
1GB DDR III, ECC-protected
Temperature: 0º to 40ºC (32º to 104º F)
Humidity: 5% to 85%
35dB to 45dB
RAIDguard X (Java-based GUI, cross-platform executable)
Windows: XP/2003/Vista/2008 and Windows 7(32/64-bit, Miniport and storport driver, WHQL certified)
Linux: Red Hat, SUSE, Fedora, CentOS, Debian...
MAC: OS X (10.5, 10.6, 10.7, 10.8)
Multiple RAID levels: 0,1,5,6, 0+1, and JBOD
Up to 4 independent disk arrays
RAID capacity partitioning: up to 16 slices
Support up to 64 LUNs
Support stripe sizes: 256 (KB)
Selective initialization method with background initialization
Online RAID set expansion and level migration
Controller and Disk Cache Control to optimize read/write performance
Support write-back and write-through caching
Automatic drive insertion/removal detection and fast disk rebuilding
Online bad block data recovery and reallocation
Disk health monitoring by S.M.A.R.T
NVRAM-based transaction log and auto parity resynchronization
Array roaming and disk traveling with redundant on-disk metadata
Array recovery to restore RAID configurations
Dual firmware images for firmware recovery
Disk lag proof technology to guarantee disk timely response
Equalization mode to smooth the performance of sequential I/Os and reduce fluctuation
Enclosure components monitoring and control via GUI
LED indicator for RAID & enclosure status
Event logging to text file with event viewer
Event notification by email (SMTP)
Centralized multiple RAID system management
Support both in-band and out-band management
Support RAID management by EFI and BIOS
Support firmware upgrade via GUI
Support CLI (Command Line Interface)
Support remote management
Dimension 87mm (H) x 175mm (W) x 265mm (L)
Weight 3.2 kg (7.05 lbs.) dual I/O module configuration without hard drives
FAN, Power, Temperature status LED indication in the front handle.
RoHS, CE, FCC, C-Tick, BSMI
3-Year Limited Warranty for RAID and within components.
1-Year Limited Warranty for HBA and cable.
Z2M-G3 Dual port HBA card
QSFP 2M copper cable
Rail and rail extenders
The B08S3-PS takes the advantage of advanced PCIe 3.0 transmission technology and Accusys unique performance optimization engine, maximizes the speed of each drive, provides continuous and stable performance.
The following table shows the B08S3-PS performance result in RAID 5 configurations via ExaSAN C1M with enterprise SAS and SSD drives.
Market Technology™ is the OEM Manufacture of HDDISK products, We offer products directly to end user in the United States, Mexico, Central and South America via a Network of Resellers. For domestic technical or sales questions contact us at 909-574-1352 or emails us at email@example.com, If you are a reseller and are interested in partnering with Market Technology please email firstname.lastname@example.org We are Latin America Distributor for Accusys ExaSAN, Tiger Technology, Cubix, Akitio, Vicom and Tolis Group, If you are interested in offer any of this products to your clients please contact us, Gracias.
Content 2008 - 2017 - Market Technology | RAIDDISKSTORE and HDDisk is a Trade Mark of Market Technology LLC. All rights reserved.